隨著業界越來越關注靜電放電（ESD）及其可能對高度敏感的電子產品和其他高科技製造造成損害，Advanced Energy集團旗下Trek和Monroe公司不斷專注於ESD靜電研究，並研發出一系列專業應用的產品，來協助客戶進行ESD的測量和控制。這些靜電測量儀器不僅精度高，而且信賴度高。 

Monroe feedback electrostatic voltmeters originated in the 1950s. Electrostatic voltmeters measure surface potential on various materials without contacting the measured surface. They are distinguished for their high accuracy, typically better than 0.1% of full scale, and provide stable, drift-free, low-noise measurements that are independent of probe-to-surface separation.

Electrostatic Fieldmeters 靜電量測儀

Electrostatic fieldmeters measure the electrostatic field strength (voltage per unit distance) between the probe and the material under test. Probe-to-surface separation must be carefully controlled for accurate measurement, allowing field strengths in the hundreds of kilovolts can to be measured. Monroe fieldmeters use a feedback-driven design to assure accurate, drift-free, non-contacting measurements.

Charge Plate Monitors 靜電消除檢測儀

Charge-plate monitors evaluate the quality of air ionization systems used to neutralize static charge accumulation. Charge-plate monitors measure both positive and negative discharge times to evaluate the production of the air ions used to neutralize charges, plus ion balance voltage.

Resistivity Meters 電阻器

Specialty resistance and resistivity meters are used to evaluate static dissipative materials, packaging, flooring, work surfaces, garments, and other items that are used in ESD static control programs.

Models are available to measure surface resistivity, surface resistance, volume resistivity, volume resistance, point-to-point resistance, and point-to-ground resistance.