• Trek 623B 高壓放大器

Trek 623B 高壓放大器

High Voltage Amplifier for Precise Control of Bi-Polar Output Voltages, 0 to ±2 kV DC or Peak AC

Advanced Energy's Trek 623B is a DC-stable, high voltage amplifier designed to provide precise control of bipolar output voltages.

-Output Voltage: 0 to ±2 kV DC or Peak AC
-Output Current: 0 to ±80 mA DC or 40 mA peak AC for 1 ms
-Slew Rate: Greater than 300 V/µs
-Large Signal Bandwidth: DC to greater than 10 kHz (1% distortion)
型號 : Trek 623B

The Trek 623B features an all-solid-state design for high slew rate, low-noise operation, and an extensive bandwidth of DC to greater than 10 kHz. It's four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This type of output is essential to achieve accurate output responses and high slew rates demanded by a variety of loads, including highly capacitive or reactive loads.

Designed to provide precise control of bipolar output voltages, the Trek 623B can be used in electrostatic beam deflection, electrooptic modulation, electrophoresis research, piezoelectric poling and driving, and numerous other applications.


Benefits

  • Achieve high accuracy with a closed-loop system
  • Drive capacitive loads via a four-quadrant output
  • Rely on ultra-accurate outputs thanks to low-output noise
  • Safeguard equipment with short-circuit protection
  • Save costs thanks to maintenance-free operation and an all-solid-state design


Dimensions: 134 mm H x 432 mm W x 439 mm D (5.25” H x 17” W x 17.25” D) 

Weight: 13.2 kg (29 lb) 

HV Connector: Alden High Voltage Connector 

BNC Connectors: Voltage monitor, current monitor, remote HV ON/OFF, out of regulation, fault/trip status Amplifier Input                                3-pin connector may be configured for inverting, noninverting or differential amplification 

Temperature: 0°C to 40°C (32°F to 104°F) 

Relative Humidity: To 85%, noncondensing 

Altitude: To 2000 meters (6561.68 ft.)

  • Dynamic adjustment optimizes the AC response for various load parameters
  • NIST-traceable calibration certificate provided with each unit
  • DC-stable for programmable supply applications
  • Local and remote high voltage ON/OFF capabilities
  • Switch selectable for current limit or trip, graduated one-turn potentiometer adjusts from 0 to 40 mA
  • Electrostatic beam deflection
  • Electrooptic modulation
  • Electrophoresis research
  • Piezoelectric poling and driving

相關產品

Trek PD07016 高壓放大器

Trek PD07016 高壓放大器

Trek 10/10B-HS 高速高壓放大器

Trek 10/10B-HS 高速高壓放大器

Trek 609E-6 高壓放大器

Trek 609E-6 高壓放大器

Trek 2205

Trek 2205

Trek 30/20A 高壓放大器

Trek 30/20A 高壓放大器

Trek 2220

Trek 2220