Trek PZD350A M/S 高壓放大器壓電驅動器
Advanced Energy’s Trek PZD350A M/S offers superior bandwidth capabilities and can be used in laser modulation, piezoelectric vibration damping, semiconductor research, and various other applications.
• Output Voltage: 0 to ±350 VDC or peak AC
• Output Current: 0 to ±400 mA
• Slew Rate: Greater than 500 V/µs
• Large Signal Bandwidth: DC to greater than 250 kHz (-3dB)
• Gain: 0 to 150 V/V, adjustable
The Trek® PZD350A M/S piezo driver and amplifier system provides precise voltage control and delivers twice the current of Advanced Energy’s Trek PZD350A. In addition to superior bandwidth capabilities, it features an all-solid-state design and impressive slew rates. Voltages for this DC-powered amplifier are factory set to your specified ranges. And a four-quadrant active output stage that sinks or sources current into reactive or resistive loads completely through the output voltage range.
Benefits
- Drive capacitive loads via a four-quadrant output
- Enable high accuracy thanks to a closed-loop system
- Safeguard equipment with short-circuit protection
- Benefit from nearly maintenance-free operation and solid-state design
- Take advantage of low-output noise and ultra-accurate outputs
- Non-inverting input is standard, but an inverting amplifier configuration is available
- Remote access
- Dynamic adjustment
- Precision voltage and current monitors
- NIST-traceable calibration certificate provided with each unit
Dimensions: 110 mm H x 432 mm x W 445 mm D (4.3” H x 17” W x 17.5” D)
Weight: 10 kg (22 lb)
HV Connector: SHV High Voltage Connector
Temperature: 0°C to 40°C (32°F to 104°F)
Relative Humidity: To 85%, noncondensing
Altitude: To 2000 meters (6561.68 ft.)
- Piezoelectric driving/control
- Laser modulation
- MEMS
- Semiconductor research
- Piezoelectric vibration damping