Name: Trek 2200 Series 高壓放大器
Brand: 亞郁科技股份有限公司
SKU: Trek 2200 Series

Trek 2200 Series 高壓放大器

Cost-Effective, High Performance, Piezo Drivers and High Voltage Amplifiers, 40 W

Advanced Energy’s Trek 2200 40-watt high voltage amplifier series includes the Trek 2205, 2210, and 2220. The amplifiers offer a winning combination of high performance, exceptional reliability, and other value-add features at an attractive price.

Trek 2205: Output ±500 V at 80 mA to 75 kHz
Trek 2210: Output ±1 k V at 40 mA to 40 kHz
Trek 2220: Output ±2 kV at 20 mA to 7.5 kHz

型號 : Trek 2200 Series

數量 :

The cost-effective Trek® 2200 piezo driver and high voltage amplifiers deliver reliable and highly effective performance for piezoelectric, electro-optic, microelectromechanical systems (MEMS), and numerous other applications.

All amplifiers feature a four-quadrant, active output that sinks or sources current into reactive or resistive loads throughout the output voltage range. This is essential to help you achieve the accurate output responses and high slew rates demanded by reactive loads. The Trek 2200 high voltage amplifiers are optimal for aerospace, biotechnology, defense, military, power, R&D, semiconductor, and electronic industries.

Benefits

Protect from overpowering the output with unique auto-recovery shutdown
Drive capacitive loads via a four-quadrant output
Rely on ultra-accurate outputs thanks to low-output noise
Take advantage of extensive bandwidth and DC stability
Dynamically adjust to optimize the AC response for various load parameters

Model 2205: Output ±500 V @ 80 mA to 75kHz
Model 2210: Output ±1 k V @ 40 mA to 40kHz
Model 2220: Output ±2 kV @ 20 mA to 7.5kHz

PARAMETER:		Model 2205	Model 2210	Model 2210
Output Voltage Range		0 to ±500V	0 to ±1 kV	0 to ±2 kV
Output Current Range		0 to ±40 mA DC 0 to ±80 mA peak AC (for 5 ms minimum)	0 to ±20 mA DC 0 to ±40 mA peak AC (for 5 ms minimum)	0 to ±10 mA DC. 0 to ±20 mA peak AC (for 5 ms minimum)
Input Voltage Range		0 to ±10 V DC or peak AC	0 to ±10 V DC or peak AC	0 to ±10 V DC or peak AC
DC Voltage Gain (Accuracy)		50 V/V (Better than 0.5% of full scale)	100 V/V (Better than 0.5% of full scale)	200 V/V (Better than 0.5% of full scale)
Output Noise		Less than 25 mV rms.	Less than 30 mV rms.	Less than 50 mV rms.
Slew Rate (10% to 90%, typical)		Greater than 150 V/µs	Greater than 150 V/µs	Greater than 100 V/µs
Large Signal Bandwidth (-3dB)*		DC to 75 kHz	DC to 40 kHz	DC to 7.5 kHz (minimum trip off frequency)
Small Signal Bandwidth (-3dB)		DC to 100 kHz	DC to 100 kHz	DC to 50 kHz
Stability	Drift with Time	Less than 300 ppm/hr, noncumulative	Less than 300 ppm/hr, noncumulative	Less than 300 ppm/hr, noncumulative
Stability	Drift with Temp.	Less than 180 ppm/°C	Less than 180 ppm/°C	Less than 180 ppm/°C
Voltage Monitor	Scale Factor	1/50th of the high-voltage output	1/100th of the high-voltage output	1/200th of the high-voltage output
Voltage Monitor	DC Accuracy	Better than 0.5% of full scale	Better than 0.5% of full scale	Better than 0.5% of full scale
Current Monitor	Scale Factor	0.1 V/mA	0.2 V/mA	0.4 V/mA
Current Monitor	DC Accuracy	Better than 2% of full scale	Better than 2% of full scale	Better than 2% of full scale