• Monroe282IS 手持式紅外線感應靜電量測儀
  • Monroe282IS 手持式紅外線感應靜電量測儀
  • Monroe282IS 手持式紅外線感應靜電量測儀

Monroe282IS 手持式紅外線感應靜電量測儀

● Pulsing-beam range finder for always obtaining the correct reading
● Exclusive Auto-Zero circuit
● HOLD button captures transient readings
● Recorder output and 40-hour battery
● Drift-free accuracy even in ionized environments
● Charged plate adapter available
● Model 282IS - Intrinsically safe (IS) meter
UL Certification Class I Division 1, Groups
A, B, C, D and Class II, Division 1, Groups
E, F, G
型號 : Monroe 282IS

The Digital Stat-Arc 3, model 282A and Digital Stat-Arc 2IS, model 282IS are full-featured hand-held fieldmeters used to perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations such as converting, printing, packaging, and plastics processing.

Display:
 LCD, 3½­digit with auto polarity readout, with HOLD and LOW BATT indicators
Range:

0 to ±19.99kV at 1 inch.

Voltages over 20kV and higher may be read by increasing the distance to the target

kV    Distance  Multiply reading by

 0­40  4.0 inches       2

 0­80  8.5 inches       4

Accuracy:
±5% of reading, + zero offset, ±2 Isd
Analog output Amplitude:
1 V signal denotes 10kV reading at 1 inch for high impedance loads
Response Time:
Typ. 80 ­ 100 msec 10 ­ 90%
Jack Type:
Accepts standard 3/32 inch (2.5mm) monaural phone plug
Battery:
9V NEDA #1604 or equivalent, Life: 40 hours of normal use, with alkaline battery
Physical:
(L x W x H): 2.4 x 4.2 x 0.9 inches (6.1 x 10.7 x 2.3 cm)
Weight:
5 oz (0.14kg) with battery
Operating Environment:
0­-50°C, 0-­85% RH (non­condensing), unaffected by ionized equipment
282IS Industrial Approval and certification:
CE mark approved UL Certification Class I Groups A, B, C, D, and Class II Groups E, F, G, when powered by 9­volt carbon zinc or zinc chloride battery NEDA 1604 or NEDA 1604D. UL Certification for Class I, Division 1, Groups C and D only when powered by 9­volt alkaline NEDA 1604A.

  • Easy-to-read digital display of field strength provides quantitative data with 100V resolution
  • LED pulsed beam range finder identifies calibrated distance from the surface
  • Chopper-stabilized measurement technique works in the presence of ionization
  • Recorder output to pass measurements to auxiliary instruments to display or record the data
  • Optional Charge Plate System for testing ionization systems
  • Model 282IS is UL approved for use in hazardous environments

相關產品

Monroe 282L 手持式靜電量測儀 (2000 Volt Range)

Monroe 282L 手持式靜電量測儀 (2000 Volt Range)

Monroe 177A 防爆靜電監視儀

Monroe 177A 防爆靜電監視儀

Monroe 257D 手持式靜電量測儀

Monroe 257D 手持式靜電量測儀

Monroe 282A 手持靜電量測儀

Monroe 282A 手持靜電量測儀

Monroe 289 手持式靜電量測儀

Monroe 289 手持式靜電量測儀

Monroe 281 手持式靜電量測儀

Monroe 281 手持式靜電量測儀