DS612 工業級乙太網路交換器
Industrial 12G L3 Managed Switch provides greater flexibility in planning large IP networks
Fully compatible with existing backbone networks
Provide a reliable, high-performance IP network
Can guarantee fast network recovery, zero packet loss for data transmission and avoid hacker attacks
Fully compatible with existing backbone networks
Provide a reliable, high-performance IP network
Can guarantee fast network recovery, zero packet loss for data transmission and avoid hacker attacks
型號 :
ds612
The 12 Port Gigabit L3 Managed Switch DS612 supports various routing protocols such as IP/VLAN routing, RIP, OSPF, VRRP router redundancy to be fully compatible with your backbone network. It is designed with advanced cyber security features such as Port-Based Security- IEEE802.1 x MAB (MAC Authentication Bypass), Access Control List (ACL, MAC/IP/ARP filter), DHCP Snooping, IP Source Guard, Dynamic ARP Inspection as well as advanced redundancy features such as WoMaster ERPSv2 Plus and eRSTP. The rugged EMC design of DS612 is certified by IEC 61850-3/IEEE 1613/EN 50121-4 standard that is the best choice for substation and railway wayside applications.
Full Gigabit Switching and Ultra-high Throughput
Dynamic Routing with Redundancy Protection
ITU-T G.8032 v1/v2 ERPS Ring Redundancy
IEC62443-4-2 Level 3 / 4 Cyber Security*
Rugged Design for Wayside Surveillance
Management Features
- 12-port Full Gigabit Ethernet with 8-port RJ-45 and 4-port SFP
- 16K MAC address table
- 1.5MByte packet buffer memory for H.264 burst
- 9K bytes jumbo frame
- Store-and-forward with non-blocking switch fabric
Dynamic Routing with Redundancy Protection
- RIPv1&v2, OSPFv1&v2 for intra-domain routing within an autonomous system
- Efficient unicast/multicast static routing
- VRRP guarantees sustainable routing in a single point of failure
ITU-T G.8032 v1/v2 ERPS Ring Redundancy
- An ITU standard Ring redundancy Protocol
- Provide sub-50ms protection and recovery switching for Ethernet traffic
- Interoperate with 3rd party industrial switch and still remain fast recovery time
- Interoperate with commercial switch instead of STP/RSTP
- Efficient network interconnection and topology with ERPS Chain, multiple chains
IEC62443-4-2 Level 3 / 4 Cyber Security*
- L2-L7 IPv4/IPv6 Access Control List (ACL)
- DHCP Snooping, IP Source Guard, Dynamic ARP Inspection
- 802.1Q VLAN, Private VLAN, Advanced Port Security
- Multi-Level user passwords
- HTTPS/SSH/SFTP, 256-bit encryption
- 802.1X MAB for non-802.1X compliant end devices
- RADIUS/TACACS+ centralized password authentication
Rugged Design for Wayside Surveillance
- EN50121-4 for railway trackside applications
- Top level EMC protection and excellent heat dissipation design for operating in -40~75oC environment
- IEC 61000-6-2/4 Heavy Industrial Environment
Management Features
- Various configuration paths, including WebGUI, CLI, SNMP and RMON
- IEEE 1588v1/v2 PTP time management
- LLDP topology control
- USB for easy field configuration and firmware update
- Software utility interface for LAN devices management
- NMS for individual component monitoring
-
Vital role of data communication between various factory automation components is evident though it brings the problem of data protection from cyber-attacks as it is based on Ethernet and Internet.
- IEC 62443-4-2
- DAI / IPSG / DoS / DHCP Snooping / 802.1X MAB / Multi-level authentication / TACACS+ / RADIUS / SFTP
-
L3 switching for complicated network topology
- Inter VLAN routing
-
Dynamic routing
- OSPF v1/2, RIP v1/2
- Static routing
- Broadcast traffic control